Q-SUN氙灯老化试验箱常用的几种试验循环方法
已被阅读2553次
2021-11-05
本文的几种常见Q-SUN氙灯老化试验箱试验循环方法来源于网络，注意：这些试验循环方法只是国家或国际标准组织、行业协会和制造商发布的各类标准中的一些代表性例子。Q-SUN根据用户需求已经预制了循环试验编程，有关测试循环的设备、编程和性能的任何问题，请联系Q-Lab代理商罗中科技。
1. AATCC TM16 耐光色牢度
| 型号: All | ||||||
| 滤光片: Window-B/SL 辐照度传感器: 420 nm 黑板: 非绝缘 | ||||||
| Step | Function | RH (%) | Irradiance (W/m2/nm) | Black Panel Temp. (°C) | Chamber Air Temp. (°C) | Step Time (hh:mm) |
| 1 | Light | 30 | 1.10 | 63 | 43 | 24:00 |
| 2 | Final Step Go To Step 1 | |||||
2. ASTM D7869 用于运输涂层的增强光和水暴露的氙弧曝光测试的标准实施规程
| 型号: All Spray Optical | ||||||
| 滤光片: Daylight-F 辐照度传感器: 340 nm 黑板: 非绝缘 | ||||||
| Step | Function | RH (%) | Irradiance (W/m2/nm) | Black Panel Temp. (°C) | Chamber Air Temp. (°C) | Step Time (hh:mm) |
| 1 | Dark + Spray | 95 | 40 | 4:00 | ||
| 2 | Light | 50 | 0.40 | 50 | 42 | 0:30 |
| 3 | Light | 50 | 0.80 | 70 | 50 | 4:30 |
| 4 | Light | 50 | 0.40 | 50 | 42 | 0:30 |
| 5 | Dark + Spray | 95 | 40 | 2:30 | ||
| 6 | Subcycle Repeat Steps 7-10 4× | |||||
| 7 | Dark + Spray | 95 | 40 | 0:30 | ||
| 8 | Light | 50 | 0.40 | 50 | 42 | 0:20 |
| 9 | Light | 50 | 0.80 | 70 | 50 | 2:00 |
| 10 | Dark | 50 | 40 | 0:10 | ||
| 11 | Final Step Go to Step 1 | |||||
3. ASTM G155 循环1，非金属材料曝晒氙灯老化试验方法
| 型号: All Spray | ||||||
| 滤光片: Daylight-Q, Daylight-B/B, Daylight-F 辐照度传感器: 340 nm 黑板: 非绝缘 | ||||||
| Step | Function | RH (%) | Irradiance (W/m2/nm) | Black Panel Temp. (°C) | Chamber Air Temp. (°C) | Step Time (hh:mm) |
| 1 | Light | 0.35 | 63 | 1:42 | ||
| 2 | Light + Spray | 0.35 | 63* | 0:18 | ||
| 3 | Final Step - Go To Step 1 | |||||
4. ASTM G155 循环6，非金属材料曝晒氙灯老化试验方法
| 型号: All | ||||||
| 滤光片: Window-Q, Window-B/SL 辐照度传感器: 420 nm 黑板: 非绝缘 | ||||||
| Step | Function | RH (%) | Irradiance (W/m2/nm) | Black Panel Temp. (°C) | Chamber Air Temp. (°C) | Step Time (hh:mm) |
| 1 | Light | 35 | 1.10 | 63 | 43* | 3:48 |
| 2 | Dark | 90 | 43* | 1:00 | ||
| 3 | Final Step - Go To Step 1 | |||||
5.ISO 105-B02, Exposure Cycle A1，纺织品－色牢度试验－耐人造光色牢度：氙弧灯试验
| 型号: All | ||||||
| 滤光片: Window-IR 辐照度传感器: 420 nm 黑板: 绝缘 | ||||||
| Step | Function | RH (%) | Irradiance (W/m2/nm) | Black Panel Temp. (°C) | Chamber Air Temp. (°C) | Step Time (hh:mm) |
| 1 | Light | 40 | 1.10 | 47 | 39* | 24:00 |
| 2 | Final Step - Go To Step 1 | |||||
6.ISO 11341, Cycle A, Method 1 色漆和清漆 人工气候老化和人工辐射暴露（滤过的氙弧辐射）
| 型号: All Spray | ||||||
| 滤光片: Daylight-Q, Daylight-B/B 辐照度传感器: 340 nm 黑板: 绝缘 | ||||||
| Step | Function | RH (%) | Irradiance (W/m2/nm) | Black Panel Temp. (°C) | Chamber Air Temp. (°C) | Step Time (hh:mm) |
| 1 | Light | 50 | 0.51 | 65 | 38 | 1:42 |
| 2 | Light + Spray | 50 | 0.51 | 65* | 38* | 0:18 |
| 3 | Final Step - Go To Step 1 | |||||
7. ISO 4892-2,Cycle 1 (also known as the 102/18 cycle) 塑料 实验室光源暴露方法.第2部分:氙弧灯
| 型号: All Spray | ||||||
| 滤光片: Daylight-Q, Daylight-B/B, Daylight-F 辐照度传感器: 340 nm 黑板: 绝缘 | ||||||
| Step | Function | RH (%) | Irradiance (W/m2/nm) | Black Panel Temp. (°C) | Chamber Air Temp. (°C) | Step Time (hh:mm) |
| 1 | Light | 50 | 0.51 | 65 | 38 | 1:42 |
| 2 | Light + Spray | 0.51 | 65* | 0:18 | ||
| 3 | Final Step - Go To Step 1 | |||||
8. SAE J2412 利用可控辐射氙弧仪器加速曝光汽车内部饰件
| 型号: All | ||||||
| 滤光片: Extended UV-Q/B 辐照度传感器: 340 nm 黑板: 非绝缘 | ||||||
| Step | Function | RH (%) | Irradiance (W/m2/nm) | Black Panel Temp. (°C) | Chamber Air Temp. (°C) | Step Time (hh:mm) |
| 1 | Light | 50 | 0.55 | 89 | 62 | 3:48 |
| 2 | Dark | 95 | 38 | 1:00 | ||
| 3 | Final Step - Go To Step 1 | |||||
9. SAE J2527 利用可控辐射氙弧仪器加速曝光汽车外部材料
| 型号: All Back Spray | ||||||
| 滤光片: Extended UV-Q/B, Daylight-B/B 辐照度传感器: 340 nm 黑板: 非绝缘 | ||||||
| Step | Function | RH (%) | Irradiance (W/m2/nm) | Black Panel Temp. (°C) | Chamber Air Temp. (°C) | Step Time (hh:mm) |
| 1 | Dark + Spray Front + Back | 95 | 38 | 1:00 | ||
| 2 | Light | 50 | 0.55 | 70 | 47 | 0:40 |
| 3 | Light + Spray Front | 50 | 0.55 | 70 | 47 | 0:20 |
| 4 | Light | 50 | 0.55 | 70 | 47 | 1:00 |
| 5 | Final Step - Go To Step 1 | |||||
